High Rise Painting Tips

Sharoon
5 min readDec 12, 2021

--

High Rise Painting
High Rise Painting

Painting a high rise building is various from painting a simple wall surface or a structure that’s easily obtainable. The obvious challenge for repair, upkeep, or painting of high rise structures is getting to the high places and various other hard to get to locations. The main purpose of painting a structure is to ensure that it’s visually attractive and at the same time, it also helps protect a structure and increase the life of a structure. An expertly painted building draws out the best of a well-constructed building with spectacular architecture.

There are several methods used to access great heights such as scaffolding, cranes as well as abseiling. The scaffolding method and use of cranes can be very expensive; on the various other hand, the abseiling method is simpler, more cost-effective, and is easy for professional high-rise mountain climbers. This article explains what is abseiling and provides tips on how it’s done. It’s a must-read for those looking for high-rise painters.

What is Abseiling?

Words ‘Abseiling’ is originated from a German word and it means to ‘rope down’. This is a prominent technique of accessing great elevations and scaling high structures is among them. This method is also used for the purpose of mountaineering, skiers, snowboarders, hill cyclists, and so on. It happens to be among the best methods to access high structures for the purpose of painting and is something that’s easily accomplished by highly skilled abseilers. Rope access painting in Sydney is used for many various kinds of high building jobs such as roofing system painting, high rise building painting, painting manufacturing facilities, and warehouses painting bridges & arenas as well as houses.

Tips for High Rise Painting

Abseiling method uses a rope that’s secured from the top and helps the high-rise painters abseil down. Here are several tips for the purpose of high rise painting:

Ensure the course to abseiling down is free from any blockages.
It’s necessary to connect a rope to a harness about the midsection of a painter, with the help of a rubbing device.
This is done by leaning out in reverse and facing a structure and using a rubbing device to control descent while painting a structure.
This method makes it feasible to access hard to get to places as well that would certainly normally be very hard to get to using conventional methods.
Finding the Right Individuals for the Job

High-rise painting is a difficult job that requires unique abilities. It’s best to leave this to the job of high-rise painting to the experts since it requires unique painting abilities as well as the ability to access high locations using the abseiling method. It’s also essential you find a professional firm for the task; here are several tips on how to do

Ensure the painting firm you select has 2 kinds of insurance; They should have insurance that safeguards the building and another that safeguards all employees painting at the property.
It’s a great practice to inspect all reviews of a firm before choosing them.
Appearance out for representatives that simply subcontract their jobs to various other arbitrary contractors, since this can affect the quality of a paint job.
Ask about the kind of items used and ensure they are environmentally friendly.
Specify the range of your project at the very start since this will determine the cost as to how the whole painting project is managed.

Alltech Coatings Professional High Rise Painting Brisbane

Access

Many of the facades and external balcony surfaces will be inaccessible to painters without using forms of access such as boom lifts, swinging stages, scaffolding, or, our preferred method of for painting high access areas — industrial abseiling.

Although our team of commercial painters are qualified to use all forms of access usually harnessed to carry out a high-rise painting project in Brisbane and the Gold Coast, our experience has shown that rope access is the safest, most efficient and least disruptive means of painting.

When painting high-rises, safety of guests is absolute paramount. That’s why Alltech Coatings has in-house workplace health and safety experts on board to assess each high rise repaint individually and devise a plan to ensure the painting project runs safely and smoothly.

Products

Choosing the right professional paint product for painting your high rise can mean the difference between a coating system that will stand the test of time and protect your building for years to come, and one that fails much too early.

Before selecting a coating system for your high rise or apartment building, our paint technicians will factor in the location of the building — proximity to salt water will have an influence on the paint you choose for your high rise — the substrate it is to be painted on, and the type of product that was previously painted on your building.

Once a proper assessment or diagnosis has been carried out on the current state of your high rise buildings surfaces and substates, you will receive a detailed report with recommendations for products and methods for carrying out pre-paint remedial works that will ensure the longevity of you paint job.

Business Continuity

Painting your high-rise building is already a big investment for you and your stakeholders.

At Alltech Coatings, we understand this and do everything we can to ensure that the painting project doesn’t also become an inconvenience for your business, residents or guests.

By taking the time to understand your operations, we are able to put together the most low impact access solutions and time schedules that allow you to carry out business as usual, whilst the high rise painting project is in progress.

Why Choose Alltech Coatings for Your High Rise Repaint?

All team members are IRATA certified — this means they have internationally recognised certificates that qualify them as safe abseiling tradesmen. All painting work will be handled by experts who work on high rise projects on a daily basis.

Gone are the days of costly scaffolding. Alltech Coating’s ultra-modern techniques, processes, tools, and equipment mean that your project is completed in the quickest time possible.

Old-school techniques like scaffolding are obtrusive, outdated, cumbersome, and time-consuming ways of painting your high-rise. Not only does the ‘dead time’ -i.e. scaffolding setup, rental, and removal costs- often run up the project price unnecessarily, but scaffolding also chases customers away.

Quality — delivering a quality paint job isn’t just what we do, it’s part of our culture. Our team of high rise painting specialists are passionate about what they do and strive towards delivering outstanding painting results for our clients that exceed expectations every time.

How long has it been since you’ve had your building painted? On average high rise buildings need painting every 10 years before they run the risk of developing chalky, failing paint and cracks or issues that cause more serious damage to the buildings substrates.

If you think it might be time to paint your high-rise building in the near future. Contact us today for some free advice and we can even offer you a budget estimate within 24 hours.

Website: https://alltechcoatings.com.au

Email: info@alltechcoatings.com.au

Phone:

Brisbane: 07 3139 8012

Sunshine Coast/Bundaberg: 07 5493 4150

Caboolture/Redcliffe 07 5493 4150

--

--

Sharoon
Sharoon

Written by Sharoon

0 Followers

Admin @17TourAgency

No responses yet